CABIN LIFT QUATTROPORTE

MAXIMUM QUALITY OF LIFE IN YOUR HOME

With the unique cabin lift QuattroPorte from ASCENDOR, you can reach all levels of your building with minimal intervention in the existing building structure. Wall breakthroughs are all that is needed to permanently increase your quality of life and at the same time enhance your property.


Simple installation
carried out by us

Individual advice
for every living situation

Reliable quality
from Austria

Get non-binding advice now

or request brochure

lift without shaft

Lift without shaft

lift for home

Simple retrofitting

lift without shaft

Panoramic view

lift without shaft

Weatherproof design

cabin lift

Doors possible on all sides

cabin lift

Protection under the cabin

lift without shaft

PRODUCT

FEATURES

PAYLOAD275 kg

STOPSup to 6

PAINTINGstandard RAL9006

VELOCITYup to 9 m/min

LIFTING HEIGHTup to 13 m

GRID OPERATION230 V

basic equipment
  • cabin with walls and doors on 3 sides
  • fourth side facing the building designed as a sanding wall
  • stainless steel handle inside
  • stainless steel keys as command transmitter
  • emergency telephone
  • emergency stop switch
  • anti-pinch protection integrated in the platform floor and ceiling
  • anti-slip knobs on the platform floor
colour
  • standard: metallic silver (similar to RAL 9006)
  • on request: all RAL colours (at extra charge)
materials
  • stable steel/aluminium lightweight construction
  • supporting components made of galvanized steel
external dimensions
  • total width 1430mm
  • total depth 1500mm
  • total height = delivery height + 2550mm
internal dimensions
  • usable platform floor space 1250 x 1250mm
  • cabin height 2000mm
  • pass-through clear car door 1050mm
  • passage light building side door 812mm
maximum lifting height
  • 13 m
stops
  • 2-6
load capacity and travel speed
  • 275 kg
  • up to 0.15m/s
shaft pit
  • not required
  • low entry height of 60 mm
control
  • lockable remote controls permanently mounted on the wall
  • access only by a restricted group of persons
  • pushbutton operation - for a movement the button must remain pressed
assembly
  • directly on the outside wall of the building
  • also on full thermal insulation facades
guide system
  • galvanised C-profiles
  • 4 castor wheels on cabin
drive
  • 2 chains, looped over the top ends of the guide rails
  • door actuators optional
drive units
  • 1 electric motor with flat gear
noise level
  • less than 70 dB (A)
power supply
  • 230V mains supply: L/N/Earth
  • protected by 16A fuse
Holding device
  • catch hook fitted with helical worm gear
safety
  • TÜV Austria EU-certified, in acc. with latest EU-machinery guidelines
  • CE-labelled
warranty
  • 24 months

Gallery

I wouldn't want to miss it.

In the course of a renovation of my parents' house, we decided on the Quattroporte panoramic lift from Ascendor and have never regretted it.

Whether it's a big purchase or grandma's question: "How do I get to the first floor?" no longer arises. Besides the good feeling of having made my mother's life easier, the lift has also significantly increased the value of our property.

Besides, it simply looks good.

Martin Heidlmair
Proud QuattroPorte owner from Spital am Pyhrn

 

TRUST IN OUR EXPERIENCE

world map Ascendor partners
0Employees
0Sales partners
0Installed lifts

IN 3 EASY STEPS TO THE cabin elevator

Icon telephone for non-binding enquiry

We look forward to receiving your non-binding enquiry by form with information about your project.

Icon People for consultation and offer

We will contact you to discuss the most suitable solution. If desired, we will be happy to arrange an on-site visit. Once we know your requirements and structural situation, we will provide you with a free quotation.

Icon tool for installation

Once the order has been placed, we will arrange an installation date with you. The installation takes between one and two days, depending on the design.

Our average delivery time for cabin elevators is usually 6 to 10 weeks.
+ 100% Made in Austria
 + We are happy to take time for you
Contact us directly about this.

INSTRUCTIONS FOR PRELIMINARY CONSTRUCTION WORK

In order for us to be able to install the QuattroPorte vertical lift, preliminary construction work is necessary. In order to make this as easy as possible for you, we have compiled a document that summarises and describes in detail these constructional preparations.

Download

BENEFIT FROM OUR EXPERIENCE:

+ Competent advice from our lift specialists
+ Regional family business
+ 100% made in Austria
+ Highly qualified specialists
+ We are happy to take time for you

Andreas Plöderl

Contact us!
Ascendor Sales Representative

non-binding price inquiry

By sending this form you accept our privacy policy. You will find all information about this in the privacy policy

Fields marked with * are mandatory.

Frequently asked questions

No - since the doors must always be equipped with security technology, they are always included in Ascendor's delivery.

 

In the standard version, exit is only possible between the guide rails at all upper stops. If the exit at the top is to be onto a balcony or terrace, the guide rails should also be attached to it if possible.

If this is not possible, we will be happy to check for you whether a lateral exit is possible at the top.

The standard version is operated by means of sensor keys and dead man's control. This means that the lift runs as long as you keep your hand on the control element.

If you select a folding door, the lift moves automatically after briefly pressing the sensor button.

After completion of the preparatory work to be carried out by the customer, installation usually takes 3-5 working days.

[Translate to English:] Kabinenlift ohne Schacht

QuattroPorte the versatile lift

for easy attachment

With our unique cabin lift, you can reach all levels of your building with minimal intervention in the existing building structure. The space under the cabin can be fully utilised - e.g. as a garage entrance or walkway. Without a shaft, the lift finds its place in all possible installation situations. Without a shaft, the lift finds its place in all possible installation situations. Doors on all sides allow maximum flexibility.

 

More products from Ascendor

wheelchair stair lift

Platform stairlift

Straight & Curve

platform lift

platform lift

UnaPorte®

Platform lift light grey modern living area

Shaft lift

Motala